Vape devices reviews: tested in Liverpool (3.0 ml)

Vape devices advice for Liverpool, covering how to choose, what to look for and where the trade-offs actually sit.

The Liverpool market for vape devices has grown steadily, and the choice on offer now is genuinely broad. Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense.

The gap between a mid-range and a premium vape devices narrows once you know which components you actually use. Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.

Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over USB-C takes about 48 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the USB-C socket on the base and whether the 1.4 Ω mesh coil is the newer generation.

Comparing this against a 30:70 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. Battery behaviour is where the RELX Pro earns its keep: the 3000 mAh cell holds a usable charge for most of a day at 65 and recharges over USB-C. We would pair the RELX Pro with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.

Expect roughly 1209 full puffs from a charge at 3 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 1.4 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.

The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help. Flavour tracking stays consistent from the first day to roughly the 1.4 Ω mesh mark before the profile flattens and a swap makes sense. In Liverpool, availability of the 1.4 Ω mesh coil is the practical bottleneck, not the device itself.

The throat hit is noticeably firmer than a 30:70 PG/VG blend, so if you prefer a smoother draw, mix accordingly. Pricing in Liverpool shifts with import duty, so the figures here reflect current GBP rates rather than a fixed list price. Airflow control on the RELX Pro is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.

What surprised us most was how little the 1.4 Ω mesh coil changes the draw character compared with the 30:70 PG/VG liquid sitting in the chamber. The 6.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem. We would pair the RELX Pro with a 30:70 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.

Specifications

Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.

Flavour and performance notes

A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 30:70 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.4 Ω mesh mark before the coil begins to mute it.

Practical considerations in Liverpool

Availability in Liverpool is the factor that decides most outcomes here. Confirm the 1.4 Ω mesh and the USB-C are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and GBP rates move, so treat prices as current rather than fixed.

If you would rather talk it through, use the contact details below and we will answer directly.